Type Here to Get Search Results !

IOCL 2020 Jobs Recruitment of 312 Technician and Trade Apprentice Vacancies

0
Indian Oil Corporation Limited (IOCL) 2020 Jobs Recruitment. IOCL has released official notification for the job openings of Technician Apprentice, Trade Apprentice vacancies. Check the eligibility and notification prior to apply for the positions.

Closing date is on :- 22nd January, 2020.

No.of Posts and Vacancies :- 

Technician Apprentice - 128 Posts

Trade Apprentice - 184 Posts

Job Location - Across India

Other Qualification Details :-

Technician Apprentice -

Applications are invited from candidates meeting the following qualification & other parameters for engagement as Apprentices under Apprentices Act, 1961/1973 (as amended from time to time) in the Trade/Disciplines mentioned below:Provisional Number of seats in Apprentice category including likely reservation shall be as follows. Reservation will be applicable as per the prescribed percentage for recruitment applicable to the States & Union Territory of North India (Chandigarh, Haryana, Himachal Pradesh, Jammu & Kashmir, Delhi, Punjab, Rajasthan, Uttarakhand & Uttar Pradesh) –

a. Prescribed Qualification/Eligibility Criteria: 

1. For Discipline Code - 501/507/513/519/525/531/537/543 - Technician Apprentice(Mechanical)- 3 years Diploma in Mechanical Engineering from recognized Institute/University with minimum 50 % marks in aggregate for General & OBC candidates & 45% in case of SC/ST candidates against reserved positions.

2. For Discipline Code – 502/508/514/520/526/532/538/544 - Technician Apprentice(Electrical) – 3 years Diploma in Electrical Engineering from recognized Institute/University with minimum 50 % marks in aggregate for General & OBC candidates & 45% in case of SC/ST candidates against reserved positions.

3. For Discipline Code- 503/509/515/521/527/533/539/545 - Technician Apprentice(Instrumentation) – 3 years Diploma in Instrumentation Engineering from recognized Institute/University with minimum 50 % marks in aggregate for General & OBC candidates & 45% in case of SC/ST candidates against reserved positions.

4. For Discipline Code- 504/510/516/522/528/534/540/546 - Technician Apprentice(Civil) – 3 years Diploma in Civil Engineering from recognized Institute/University with minimum 50 % marks in aggregate for General & OBC candidates & 45% in case of SC/ST candidates against reserved positions.

5. For Discipline Code- 505/511/517/523/529/535/541/547 - Technician Apprentice(Electrical & Electronics) – 3 years Diploma in Electrical & Electronics Engineering from recognized Institute/University with minimum 50 % marks in aggregate for General & OBC candidates & 45% in case of SC/ST candidates against reserved positions.

|6. For Discipline Code- 506/512/518/524/530/536/542/548 - Technician Apprentice(Electronics) – 3 years Diploma in Electronics Engineering from recognized Institute/University with minimum 50 % marks in aggregate for General& OBC candidates & 45% in case of SC/ST candidates against reserved positions. 

b. Period of Apprenticeship Training 1. 12 Months for all disciplines except 2. Trade Apprentice – Data Entry Operator (Fresher Apprentices) & Trade Apprentice – Data Entry Operator (Skilled Certificate Holders) will be having 15 Months training

c. Stipend: Rate of stipend payable to apprentices per month shall be as prescribed under Apprentices Act, 1961/1973 / Apprentices Rules 1992 (as amended) and Corporation’s guidelines.

Age: Minimum 18 years and maximum 24 years as on 30.11.2019 for General / EWS candidates. Relaxation of upper age limit to SC/ST/OBC (NCL)/PwBD candidates shall be extended as per Govt. guidelines.

Trade Apprentice -

Applications are invited from candidates meeting the following qualification & other parameters for engagement as Apprentices under Apprentices Act, 1961/1973 (as amended from time to time) in the Trade/Disciplines mentioned below:Provisional Number of seats in Apprentice category including likely reservation shall be as follows. Reservation will be applicable as per the prescribed percentage for recruitment applicable to the States & Union Territory of North India (Chandigarh, Haryana, Himachal Pradesh, Jammu & Kashmir, Delhi, Punjab, Rajasthan, Uttarakhand & Uttar Pradesh) –

a. Prescribed Qualification/Eligibility Criteria: 

1. For Discipline Code- 549/554/559/564/569/574/579/584 - Trade Apprentice (Fitter) – Regular Full time ITI (Fitter) recognized by NCVT / SCVT.

2. For Discipline Code- 550/555/560/565/570/575/580/585 - Trade Apprentice (Electrician) – Regular Full time ITI (Electrician) recognized by NCVT / SCVT.

3. For Discipline Code- 551/556/561/566/571/576/581/586 - Trade Apprentice (Electronics Mechanic) – Regular Full time ITI (Electronics Mechanic) recognized by NCVT / SCVT.

4. For Discipline Code- 552/557/562/567/572/577/582/587 - Trade Apprentice (Instrument Mechanic) – Regular Full time ITI (Instrument Mechanic) recognized by NCVT / SCVT

5. For Discipline Code- 553/558/563/568/573/578/583/588 - Trade Apprentice (Machinist) – Regular Full time ITI (Machinist) recognized by NCVT / SCVT.

6. For Discipline Code – 589/590/591/592/593/594/595/596/597 - Trade Apprentice-Accountant: Regular Full Time Graduate in any discipline with minimum 50% marks in aggregate for General & OBC candidates and 45% in case of SC/ST/PwBD candidates for reserved positions from a recognized Institute/University.

7. For Discipline Code – 598/599/600/601/602/603/604 - Trade Apprentice – Data Entry Operator (Fresher Apprentices): Class XII or its equivalent with minimum 50% marks in aggregate for General & OBC candidates and 45% in case of SC/ST/PwBD candidates for reserved positions from a recognized Board/Institute.

8. For Discipline Code – 605/606/607/608/609/610/611 - Trade Apprentice – Data Entry Operator (Skilled Certificate Holders): Class XII or its equivalent with Skill Certificate holder in ‘Domestic Data Entry Operator’ with minimum 50% marks in aggregate for General & OBC candidates and 45% in case of SC/ST/PwBD candidates for reserved positions from a recognized Board / Institute.

b. Period of Apprenticeship Training 1. 12 Months for all disciplines except 2. Trade Apprentice – Data Entry Operator (Fresher Apprentices) & Trade Apprentice – Data Entry Operator (Skilled Certificate Holders) will be having 15 Months training

c. Stipend: Rate of stipend payable to apprentices per month shall be as prescribed under Apprentices Act, 1961/1973 / Apprentices Rules 1992 (as amended) and Corporation’s guidelines.

Age: Minimum 18 years and maximum 24 years as on 30.11.2019 for General / EWS candidates. Relaxation of upper age limit to SC/ST/OBC (NCL)/PwBD candidates shall be extended as per Govt. guidelines.

Document :-

1. 10th Pass/Matriculation certificate issued by the concerned education board as proof of date of birth. No other document will be accepted for verification of date of birth.
2. SC/ST/OBC(NCL)/Disability/EWS-Income & Asset Certificate by reserved category candidates in the prescribed format issued by Competent Authority.
3. Class XII marksheet issued by the concerned education board/ Semester-wise/ year-wise mark sheets of ITI (Fitter)
issued by NCVT or SCVT/Graduation/Diploma Engineering
4. Class XII/Final ITI (Fitter) issued by NCVT or SCVT/Graduation/Diploma Certificate issued by respective Board/ Authority.
5. Conversion certificate from CGPA/OGPA/Letter Grade to percentage of marks, if applicable, from concerned University/Institute.
6. Certificate mentioning the date of publication of result from the Principal of the Polytechnic/ School/College/ Institute from where the candidate pursued his/her Class XII/ITI (Fitter)/ Graduation/ Diploma course, if applicable.
7. For Candidates applying against Code 111 with Skill Certificate in ‘Domestic Data Entry Operator’ - Skill certificate issued by an awarding body recognised under National Skill Qualifications Framework or any other authority recognised by the Central Govt. in this regard.
8. Any other Certificate, as specified. 

General Instructions :-

1. Candidates are advised to carefully read the full advertisement for details of educational qualification and other eligibility criteria before submission of on-line application.At any stage of the selection process, if it is found that the candidate has furnished false or incorrect information, the candidature of the candidate will be cancelled. Candidate shall also render himself liable for criminal prosecution.

2. The candidature of the applicant would be provisional and subject to subsequent verification of certificates and testimonials etc. In case it is detected at any stage of engagement or thereafter, that a candidate does not fulfil the eligibility norms and/or that he/she has furnished any incorrect/doctored/false information/certificate/documents or has suppressed any material fact(s), his/her candidature will stand cancelled. If any of these shortcomings is/are detected even after engagement, his/her engagement is liable to be terminated.

3. Candidates are advised to carefully read the full advertisement for details of educational qualification and other eligibility criteria before submission of online application.Candidates are advised to register as a Trade Apprentice online in the Regional Directorate of Apprenticeship Training (RDAT) http://www.apprenticeship.gov.in/Pages/Apprenticeship/home.aspx OR as a Technician Apprentice online with the Board of Apprenticeship Training (BOAT) at https://portal.mhrdnats.gov.in/boat/commonRedirect/registermenunew!registermenunew.action

4. The candidature of the applicant would be provisional and subject to subsequent verification of certificates and testimonials. In case, it is detected at any stage of engagement or thereafter, that a candidate does not fulfil the eligibility norms and/or that he/she has furnished any incorrect/doctored/false information/certificate/documents or has suppressed any material fact(s), his/her candidature will stand cancelled. Candidate shall also render himself liable to criminal prosecution. If any of these shortcomings is/are detected even after engagement if any, his/her engagement is liable to be terminated.

Selection Procedure :-

Selection shall be on the basis of performance of the candidates on the basis of marks obtained by them in the Written Test (Duration 90 Minutes) and meeting notified eligibility criteria.The Written Test will comprise of 100 questions with Objective Type Multiple Choice Questions (MCQs) consisting of four option with one correct option. The questions would be in bilingual i.e. English & Hindi.

Steps to Apply :-

1. The candidates meeting the prescribed eligibility criteria may apply online from through the link which will be provided in our corporate website www.iocl.com(Careers-> Apprenticeships-> Engagement of Technical and Non-Technical Trade & Technician Apprentices in Northern Region (Marketing Division). Only Online mode of applications will be accepted.Last Date Of Submission Of Online Application 22.01.2020

2. Candidate needs to upload, scanned copy of the latest colour photograph, scanned copy of the documents namely proof of date of birth (Xth Std certificate/mark sheet), prescribed educational qualification, EWS / Caste certificate as applicable and signature to be uploaded without fail. In the absence of any single document, the application shall be summarily rejected. Eligible candidates will be intimated by e-mail / sms for downloading admit card for the written test.All the candidates are advised to keep a printout of the online application form as candidates must mention their application number and date of birth for downloading admit cards from the website www.iocl.com(Careers-> Apprenticeships-> Engagement of Technical and Non -Technical Trade & Technician Apprentices in Northern Region (Marketing Division)-FY 2019-20 Phase II.

3. The candidate should have the scanned copies of self-attested photocopies of the following documents ready in pdf/jpg format (not exceeding size of 100kb each)-before applying on-line - Xth std /SSLC /Matriculation certificate /mark sheet issued by concerned education Board as proof of date of birth. Certificate of the prescribed educational qualification-ITI/ Graduation/ Diploma in Engineering (as applicable) EWS / Caste certificate if applicable. Signature in black ink. Recent colour passport size photograph

4. The candidate should have scanned copy of colour photograph and signature in jpg format (size not exceeding 50 KB) ready before applying on-line. The photo and signature in digital form will be required to be uploaded. The candidate must ascertain the correctness of all information before filling in the On-line Application Form and its final submission.

5. Further information regarding written examination, call letters, results, etc. shall be made available through the websites www.iocl.com or through email. Candidates are, therefore, advised to keep visiting the websites www.iocl.com and check their registered email regularly. 9. Canvassing in any form is liable to render the candidate ineligible. Queries, if any, may be addressed to the following e-mail id : [email protected] (Advertisement No. IOCL/MKTG/NR/APPR/2019-20/2)

Important Date :-

1 Date Of Opening Of Online Application 26.12.2019
2 Last Date Of Submission Of Online Application 22.01.2020
3 Tentative Date For Download Of Admit Card By Candidates 28.01.2020
4 Tentative Date Of Written Test 02.02.2020

Post a comment

0 Comments